This paper reports the design, fabrication and characterization of a cell stretching device based on the side stretching approach. Numerical simulation using finite element method provides a guideline for optimizing the geometry and maximizing the output strain of the stretched membrane. An unique PDMS-based micro fabrication process was developed for obtaining high parallelization, well controlled membrane thickness and an ultra-thin bottom layer that is crucial for the use with confocal microscopes. The stretching experiments are fully automated with both device actuation and image acquisition. A programmable pneumatic control system was built for simultaneous driving of 24 stretching arrays. The actuation sigls are synchronized with the image acquisition system to obtain time-lapse recording of cells grown on the stretched membrane. Experimental results verified the characteristics predicted by the simulation. A platform with 15 stretching units was integrated on a standard 24 mm נ50 mm glass slide. Each unit can achieve a maximum strain of more than 60 %. The platform was tested for cell growth under cyclic stretching. The prelimiry results show that the device is compatible with all standard microscopes.
Unless otherwise indicated, works by Griffith University Scholars are © Griffith University. For further details please refer to the University Intellectual Property Policy.